Tryout Facility Equipment List.

“What really impressed us is Commercial Tool & Die along with the CG Plastics division is able to do their own tryouts, which truly makes them a full service provider. I can place an entire program package with them — very important and hard to find in today’s market.“

Injection Molding Machines

  • 1 – 85 Ton Engle
      (Shot Size: 5 oz, Distance between tie bars: n/a)
  • 1 – 170 HT Van Dorn
      (Shot Size: 14 oz, Distance between tie bars: 20″ x 20″)
  • 1 – 300 HT Van Dorn
      (Shot Size: 40 oz, Distance between tie bars: 25″ x 25″)
  • 1 – 500 HP Van Dorn
      (Shot Size: 60 oz, Distance between tie bars: 36.5″ x 32.5″)
  • 1 – Toyo Si-6 500
      (Shot Size: 55.51 oz, Distance between tie bars: 36.02″ x 36.02″)
  • 1 – Toyo Si-6 940
      (Shot Size: 131.59 oz, Distance between tie bars: 45.07″ x 45.07″)
  • 1 – 1100 Cal. Van Dorn with magnetic platens
      (Shot Size: 165 oz, Distance between tie bars: 55″ x 45″)
  • 1 – KM2300 MX Krauss Maffei with magnetic platens
      (Shot Size: 310.1 oz, Distance between tie bars: 79.59″ x 63.83″)

Driers

  • 4 – 150CFM
  • 1 – 850CFM

Mixer

  • 1 – 600 lbs./hr 3-part

Grinder

  • 1 – Nelmore RG 15M1

Hoist Capacity

  • 1 – 10-25 ton
  • 1 – 10 ton

Hot Runner Controllers

  • 4 – 12-Zone (DME)
  • 4 – Single Zone (DME)
  • 1 – 36-Zone (PETS)
  • 2 – 12-Zone Husky

Hoppers

  • 1 – 275lbs
  • 4 – 400lbs
  • 1 – 600lbs
  • 2 – 2500lbs

Thermolators

  • 12 – 3/4 HP
  • 4 – 7.5 HP

Chiller

  • 1 – 7.5 Ton

Specialty

  • 1 – Gas assist (dual unit)
  • 1 – Hydraulic valve gate controller
  • 2 – Hydraulic/pneumatic valve gate controller w/ remote capability

Download/Print Equipment List

NEED VALIDATION?
CGP can help.

Contact Us Today

Complete Sampling Facility

take a look inside...

Our goal is simple; provide excellent customer responsiveness, maintain the ability to react to short lead time sample requests, provide useful sample data and tool evaluations and most importantly, produce the best possible parts from the mold!

Using CG Plastics' Tryout Facility

what customers need to know...
  • Minimum charge covers first three hours of press time, including set-up time and labor
  • PO, mold(s), material and instructions must be at CG Plastics 24 hours in advance
  • Normal sampling hours are between 7:00AM and 5:00PM, Monday – Friday
  • Evening and weekend sampling is available and is subject to additional charges
  • Corrugated packaging is included for all samples 50 pieces or less
  • Dartpak system and all other auxiliary equipment available upon request
  • 48 hour advance notice is necessary for samples which require nitrogen gas